Elbow Properties
Property Name | Description |
---|---|
Angle | <angle value> between 1° and 90° |
Auto Size |
Radius
RadToDia
inradius
r/d=
<numeric value>
|
Auto Size asd-500 | For Mitre elbow, sets properties to asd500 catalog specific. |
Connection 1 | Length (L1) | Positive <numeric value> |
Connection 2 | Length (L2) | Positive <numeric value> |
Connection 3 | Length (L3) ... Connection 6 | Length (L6) | <numeric value> |
Connection | End Type |
fl
-<numeric value>
m
-<numeric value>
fe
-<numeric value>
Separate End Type entries for each End Spec with a semi
colon.
Example: fl-2;fe-.13 creates a flange at End1 with size 2, and a female connection at End2 with an overall reduction of component's dimensions of .13 |
Elbow Type | 0 1 2 |
End Segment Angle | <angle value> between 1° and 90° |
No. of Vanes |
<zero> and <integer> |
No. Of Mitres | <integer> between 2 and 45. |
Number Of Segments | <integer> |
Offset | <numeric value> |
Radius 1 (R1) | Positive <numeric value> |
Radius 2 (R2) | Positive <numeric value> |
Radius | Positive <numeric value> |
Radius to Diameter Ratio | <numeric value> greater than or equal to 1 |
Segment Angle | <angle value> between 1° and 90°. |
Standard Angle | <angle value> between 5° and 90° |
Run1 Vane Size
Run3 Vane Size |
<numeric value>;<numeric value> |
Vane Length / Radius | <numeric value>;<numeric value> |
Vane Type | 0–ShortRadius 1–LongRadius 2–ShortAngle 3–LongAngle |
Property Option menus are available to assist in making some property entries.