Elevate Point
Incline a roof section by specifying a height, angle, or pitch and selecting the point to elevate.
Accessed from:Setting | Description |
---|---|
Method | There are several methods for elevating a roof section point.
Select a method from the drop-down list:
|
Height | Enabled for the From roof level and Change height methods. Specifies the distance value used for the elevation change. |
Angle | Specifies the angle value used for the elevation change. |
Pitch | Specifies the pitch value used for the elevation change. |
Tip: Units
Display – Units are displayed using the default system of units that was
defined for the project, but can be
changed to display using
alternative units.