To Configure ALIM
The
ALIM application must be configured in order to
incorporate Windows Integrated Authentication.
Follow these steps to enable Windows Authentication in ALIM.
- On the ALIM Web Server server, navigate to the installation folder, for example, C:\inetpub\wwwroot\alim .
- Using a text editor, open the web.config configuration file.
-
In the
<system.web> section, do the following:
- Locate the <authentication mode="none"/> attribute, and change its value to "Windows"
- Set <identity impersonate="true" />
<system.web> <authentication mode="Windows" /> <identity impersonate="true" /> <compilation debug="false" targetFramework="4.5" /> >httpRuntime targetFramework="4.5" requestValidationMode="4.5" maxUrlLength="2048" /> </system.web>
-
Locate the
<system.webServer> section, and then
locate the
<modules> section, and delete the
following line:
<add name="WSFederationAuthenticationModule" type="System.IdentityModel.Services.WSFederationAuthenticationModule, System.IdentityModel.Services, Version-4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" preCondition-"managedHandler" />
- Locate the <appSettings> section, and insert the following line: <add key="AllowIntegratedWindowsFileDownloads" value="true" />
- Save and close the file.
- Open the config.json configuration file that corresponds to the override config that you are using for the website, and change its authentication key to "authentication": "Integrated"
- Save and close the file, and then close the text editor.