Adding Time vs. Elevation Data to an Outfall
You can define tidal curve tables for outfalls in CivilStorm . You define a tidal curve for an outfall as a Time vs. Elevation curve.
Note: You can also add a Cyclic Time vs. Elevation curve to an outfall. For more information, see
"Adding Cyclic Time vs. Elevation Data to an Outfall"
.
To add a Time vs. Elevation curve to an outfall:
- Click an outfall in your model to display the Property Editor, or right-click an outfall and select Properties from the shortcut menu.
- In the Boundary Condition section of the Property Editor, select Time-Elevation Curve in the Boundary Condition Type field. The Time-Elevation Curve field becomes available.
- Click the Ellipses (...) button next to the Time-Elevation Curve field.
- In the Time-Elevation Curve dialog box, each row in the table represents a point on the Time-Elevation curve. Type values for the Time and Elevation for each row. Click the New button to add a row or press the Tab key to advance to the next field in the table.
- Perform the following optional steps:
- To delete a row from the table, select the row then click Delete.
- To view a report on the curve, click Report.
- To view a plot of the curve, click Graph.
- Click OK to close the dialog box and save your curve data in the Property Editor.
Time-Elevation Curve Dialog Box
This dialog box allows you to define tidal curve (time vs. elevation) tables for outfalls when the Boundary Condition is set to Time-Elevation Curve.
The dialog box contains the time-vs.-elevation table and the following buttons:
The table contains the following columns: