Display
|
Choose a display mode from Full Color, Monochrome and Analytic.
|
Path Tracer Denoiser settings
|
Select a path tracer denoiser.
|
Bloom
|
Adjust the bloom settings:
- Radius - adjust
bloom radius using the slider or by typing the value. Higher value will cause
larger bloom effect.
- Threshold - adjust
bloom threshold using the slider or by typing the value. Lower value will cause
brighter pixels.
|
Post Processing
|
If on, enables post processing settings:
- Color Filtering -
choose a color to apply color filter
- Color Perspective -
choose a color to replace darker areas
- Color Correction -
- Brightness -
adjust the slider or type in value to increase or decrease the overall
brightness of the image.
- Contrast -
adjust the slider or type in value to increase or decrease the overall contrast
of the image.
- Hue - adjust the
angle to shift the color tones.
- Saturation -
adjust the overall saturation of the image.
- Density -
adjust the overall density of colors in the image.
|
Image settings
|
- Gamma - Used to
adjust for differences in display hardware. A view gamma of 1.7 works well for
most LCD displays. Printers often require a higher gamma value, usually between
2.0 and 3.0. A gamma of 2 to 2.3 works well for most interior renderings and
you can use lower Gamma values for exterior scenes. Once you have set the best
gamma value for your device, you should not have to change it again until your
hardware changes. You can adjust the slider or type in a value.
- Background Settings
- (Enabled only if an environment was not used for the rendering).
- Background Uses
Scene brightness - enable to adjust image brightness, Gamma and Background.
- Image Brightness -
adjust using slider of typing in a value.
- Gamma - adjust Gamma
using slider or typing in a value.
- Background -
updates the active environments with the current background settings.
- Blank -
Background is blank.
- Color -
Background color is used.
- Image -
Background image is used.
|