Measure Length
Used to measure the length of an element(s) and analyze mass properties. For a closed element or a surface, the length of the perimeter or wireframe geometry is measured.
Measurements of referenced perspective saved views are not supported.
Setting | Description |
---|---|
Mass Properties | If on, the Mass Properties window displays the mass property analysis. |
Display Centroid | If on, a graphic crosshair that represents the center of mass for the measured element(s) is displayed. |
(Technology Preview) Use reference scale | Allows users to measure in true model units while in a Sheet model that contains a scaled reference file. This checkbox is off by default. |
Flatten Direction | Sets how measurements for the length are reported.
|
Length | Displays the length measured. |
Direction | Displays the angle measured. |