3D Line Following tool settings
Setting | Description |
---|---|
Max Line Width |
The maximum width to search for points. |
Fixed Segment Length |
Line segments will be drawn at the specified length. |
Check Intersection |
Look for intersections. |
Low Intensity |
The lowest intensity to process. |
High Intensity |
The highest intensity to process. |
Highlight Processed Points | When turned on, the points that have intensities within "Low Intensity" and "High Intensity" are highlighted using the user defined color. |
Use All Point Clouds |
Use all attached point clouds during processing. |
Gap Jumping |
Causes the process to jump gaps. |
Max Length |
Maximum length of gap to jump and still consider the line to be solid. |
Search Angle |
Maximum angle to deviate while looking for points to process. |
Confirm Jump |
Confirm if a gap should be jumped. |
MeasureTool |
Used to measure the distance directly from the model. |
Select Intensity |
Used to select the intensity directly from the point cloud. |