Multi-line Styles Dialog, End Caps and Joints Tab
Contains controls for specifying the appearance of the start cap, end cap or joint lines. Caps can have any or all of the available parts.
Setting | Description |
---|---|
Level | Sets the level on which the selected cap or joint is placed. |
Color | Forces the start\end cap or joint to take the color from the attached segment. If the segments on either side of the cap are different colors, the cap or joint will be split with each half showing in the color of each side. |
Line Style | Sets the type of line style (Standard, Custom, or By Level) of the selected component. |
LS Scale | If on, sets the scale factor applied to all displayable characteristics (dash length and width, point symbol size) of the Active Line Style. |
LS Width | If on, sets the starting width, in master units, of each dash stroke (thereby modifying the widths specified for these strokes in the definition of the Active Line Style). |
Weight | Sets the line weight (0-31) of the selected component. |
Class | Sets the class (Primary or Construction) of the selected component. |
Angle | Sets the caps' line angle, in degrees. |
Line | Draws the cap as a line. |
Outer Arc | An arc connects the outermost component lines. |
Inner Arcs | Arcs connect pairs of inside component lines. If there is an even number of inside component lines, all are connected. If there is an odd number of inside component lines (three or more), the middle line is not connected. |
Color from Segment | Sets the color of start/end cap or joint to the attached segments color. |
List box | Displays all available caps and joints. |