Solid by Extrusion Along Path
- a tubular solid extrusion along a path.
- a solid by extruding a profile element along a path. Profile elements can be a closed element such as a shape, complex shape, B-spline surface, or a selected face of solid or surface element.
You can access this tool from the following:
Prior to accepting the construction, the result is displayed along with graphics that let you adjust the scale origin point (if scaling is enabled) and the direction of the extrusion.
Setting | Description |
---|---|
Thickness | Sets the wall thickness when a hollow solid, or a surface with thickness is required.
|
Variable Link | Let's you use an existing variable to set the input value, defined in the Variables dialog. |
Alignment | Determines the orientation of the profile element as it is extruded. |
Scale | Lets you apply a scale factor to the extrusion. The profile is scaled about the selected scale point as it is extruded. Prior to accepting the extrusion, you can adjust the scale point by dragging the scale point graphic (sphere) to a new location. |
Spin | If on, the profile is rotated by the angle specified in the angle field as it is extruded along the path. |
Lock Profile Rotation | If on, lets you define the direction for the orientation of the profile as it is extruded along a non-planar path. If off, the orientation of the profile is controlled by the geometry of the non-planar path, possibly causing unwanted twisting. |
Allow Self-Intersection | Allows geometry that will intersect with itself to be created. If on, the creation of intersecting geometry can take a long time. |
Path | Sets the behavior of the path after the feature is created.
|
Profile | Sets the behavior of the profile after the feature is created.
|