General
|
- Type – Sets the
truss type from the drop-down list. Available options are: Type 1, Type 2, Type
2-A, Type 2-B, and Type 2-C.
- Side – Sets the
truss side from the drop-down list. Available options are: Left, Right,
Different sides, and Symmetric.
- B – Sets height
of the truss.
- F – Sets
deflection to the truss. Negative value deflects in reverse direction.
- A1 /
A2 – Sets top / bottom chord angles respectively.
|
Dimension
|
- Side – Enables
for Different Sides option. Left side or Right Side can be set.
- L – Sets truss
length. Enabled when
Uniform fields are set.
- A – Sets truss
side height.
- C /
D – Sets offset distance for first / last segment
- Start
Segment – When checked, inserts first truss vertical segment
- End
Segment – When checked, inserts last truss vertical segment
- Uniform – When
checked, creates different fields. When unchecked,
Length can be set and allows setting
Distance of intermediate segments.
- [+] /
[-] – Adds/ Removes fields. The number count updates.
- Number –
Displays number of segments, appended with Add/ Remove field.
- Distance –
Enabled when Uniform is unchecked. Sets the length for intermediate segment,
currently selected in the list.
|
Material and bolt
|
- Shape
material – Sets the material for truss shape.
- Plate
material – Sets the material for plate of truss.
- Bolt
stype – Sets bolt style when Bolt is checked.
- Bolts – When
checked, inserts bolt of selected bolt style.
|