Layout
|
Sets the design of the top/down seat.
You can choose the layout to design the seat with
their parameters, between:
or, simply with the individual cell by selecting
- Cells – disable
all the settings, and use the user cell cell for the top/down seat
|
Seat length
|
Sets the length of the shape, plate or shoe-socket.
|
Seat width
|
Sets the width of the plate or socket.
|
Seat thick
|
Sets the thickness of the plate or socket
|
Insert holes
|
When checked, inserts a hole field into the seat.
Enables settings for defining the hole.
- Longitudinal –
Sets the design of the hole field in shape in length direction.
- In
transversal – Sets the design of the hole field in shape in cross
direction.
- Diameter – Sets
the diameter of the bolt, in addition to the
Workloose gives hole diameter.
- Workloose –
Sets the spacing between the bolt diameter and hole diameter. The additional
value to the hole diameter.
- Hole
distance from.. – Sets the distance of the insertion point of the
hole from the corresponding definition or endpoint. This is the distance from
the outer point to the center of the hole.
|