Dimensions
|
- Length – Sets
the base plate dimension in a direction parallel to the cross-sectional X axis
of the shape selected. A positive value determines the length. A negative value
or value of 0 is not permitted. The default is 400 or 16 depending on the units
setting.
- Width – Sets
the base plate dimension in a direction parallel to the cross-sectional Y axis
of the shape selected. A positive value determines the width. A negative value
or value of 0 is not permitted. The default is 400 or 16 depending on the units
setting.
- Thickness –
Sets the base plate thickness. A positive value determines the thickness. A
negative value of value of 0 is not permitted. The default is 15 or 0.625
depending on the units setting.
- Grout
Thickness – Sets the grout allowance for the base plate. A positive
or negative value determines the additional space between the plate and the
point of reference of the shape selected. A value of 0 indicates no grout
allowance. The default is 0.
- X / Y
Offset – Sets the base plate offset from the midline of the shape
selected, in the X and Y directions, respectively. A positive or negative value
determines the offset. A value of 0 indicates no offset. The default is 0.
|
Washer Dimensions
|
Defines the size and orientation of the holes washers
(spacers) above the holes in the base plate.
- Washers – When
checked, creates hole washers for each hole in the base plate.
- Aligned – When
checked, aligns washers to the X/Y axis of the base plate. When unchecked,
aligns washer radially to the reference point.
- Length – Sets
the of the spacer. A positive value determines the length. A negative value or
value of 0 is not permitted. The default is 30 or 1.25 depending on the units
setting.
- Width – Sets
the width of the spacer. A positive value determines the width. A negative
value or value of 0 is not permitted. The default is 30 or 1.25 depending on
the units setting.
- Thickness –
Sets the thickness of the spacer. A positive value determines the thickness. A
negative value of value of 0 is not permitted. The default is 6 or 0.25
depending on the units setting.
- Hole
Diameter – Sets the diameter of the spacer. A positive value
determines the diameter. A negative value or value of 0 is not permitted. The
default is 18 or 0.75 depending on the units setting.
|
Options
|
- Align to
Shape Normal – When checked, positions the base plate so that the
base plate normal is parallel to the direction of the selected shape. When
unchecked, the base plate normal is parallel to the Z axis of the WCS.
- Align
Plate – When checked, positions the base plate so that the base
plates length direction is parallel with the cross-sectional X axis of the
shape selected. Otherwise the base plate is aligned to the X/Y axis of the WCS.
-
Group – When checked, the selected shape, plate and other created
objects are arranged to form a group. If the selected shape is already part of
an existing group then the created objects are added to that group.
- Shorten
Column – When checked, shortens the selected shape by the base
plate thickness and the grout thickness value. When unchecked, positions the
base plate based on the existing shape length.
|