Lines
|
Line Between
Points
|
Line Between Points creates a
line between two user defined points.
The points can be defined in several ways:
- A
click in the graphics
- Using
the
Civil AccuDraw tool
- Snapped relative to other elements
- Previously created geometry point
element
|
Line To
Element
|
|
Simple Line to
Element
|
Creates a line without any
transition to another element at zero degrees skew angle, applicable only when
the To element is a curve, Offset locked at zero.
|
Spiral Line to
Element
|
Creates a line with a spiral
transition to another element at zero degrees skew angle, applicable only when
the To element is a curve, Offset locked at zero.
|
Curve Line to
Element
|
Creates a line with an arc
transition to another element at zero degrees skew angle, applicable only when
the To element is a curve, Offset locked at zero.
|
By Angle Line to
Element
|
Creates a line without any
transition at user defined skew angle, Offset locked at zero.
|
Line to
Element
|
Line To Element constructs a line
at a skew to a reference element.
|
Line Between
Arcs
|
Constructs a line between two
previously placed arcs.
|
Line From
Element
|
|
Simple Line From
Element
|
Creates a line without any
transition from another element at zero degrees skew angle, Applicable only
when the From element is a curve, Offset locked at zero.
|
Spiral Line From
Element
|
Creates a line with a spiral
transition from another element at zero degrees skew angle, applicable only
when the From element is a curve, Offset locked at zero.
|
Curve Line From
Element
|
Creates a line with an arc
transition from another element at zero degrees skew angle, applicable only
when the From element is a curve, Offset locked at zero.
|
By Angle Line From
Element
|
Creates a line without any
transition from another element at a skew angle you define, Offset locked at
zero.
|
Line From
Element
|
Constructs a line at a skew from
a base element.
|
Chamfer Between
Points
|
Planes a corner, example, it
alters an existing intersection by inserting a line between the elements.
|
Arcs
|
Circle
|
Draws a circle.
|
Arc Between
Points
|
Creates an arc between points.
|
Arc To
Element
|
|
Simple Arc To
Element
|
Creates a simple radius arc
without any transition to another element, Offset locked at zero.
|
Two Center Arc To
Element
|
Creates an arc with an arc
transition to another element, Offset locked at zero.
|
Spiral Arc To
Element
|
Creates an arc with a spiral
transition to another element, Offset locked at zero.
|
Reverse Spiral Arc To
Element
|
Creates an arc with a reverse
spiral transition to another element, applicable only when the To element is a
curve of opposite hand, Offset locked at zero.
|
Arc To
Element
|
Constructs an arc based on a
selected base element which controls tangency at one end.
|
Arc Between
Arcs
|
Constructs an arc between two
previously placed arcs. This tool has the ability to optionally apply both a
back and/or forward transition between the base arcs and the constructed arc.
|
Arc From
Element
|
|
Simple Arc From
Element
|
Creates a simple radius arc
without any transition to another element, Offset locked at zero.
|
Two Center Arc From
Element
|
Creates an arc with an arc
transition from another element, Offset locked at zero.
|
Spiral Arc From
Element
|
Creates an arc with a spiral
transition from another element, Offset locked at zero.
|
Reverse Spiral Arc From
Element
|
Creates an arc with a reverse
spiral transition to another element, applicable only when the From element is
a curve of opposite hand, Offset locked at zero.
|
Arc From
Element
|
Constructs an arc based on a
selected base element that controls tangency at one end. The construct may also
include an optional spiral transition or arc transition (2 center curve).
|
Arc Between
Elements
|
|
Simple Arc
|
Creates a radius arc without
spirals or tapers at both ends, Offsets locked at zero.
|
Spiral Arc
Spiral
|
Creates a radius arc with spiral
transitions but no tapers at both ends, Offsets locked at zero.
|
Taper Arc
Taper
|
Creates a radius arc with tapers
but no transitions at both ends, Offsets locked at zero.
|
3 Center
Arc
|
Creates a radius arc with radius
transitions at both ends, result is a three centered curve, Offsets locked at
zero.
|
2 Center
Arc
|
Creates a radius arc with radius
transitions at one end, result is a two centered curve, Offsets locked at zero.
|
Arc Between
Elements
|
Constructs an arc between two
previously placed elements. This tool has the ability to optionally apply a
back and/or forward transition and/or taper between the elements and the
constructed arc.
|
Complex Transition
Between Any Element and Arc
|
Constructs an arc between two
previously placed elements. This tool has the ability to optionally apply a
Back Spiral and/or Ahead Transition between the elements and the constructed
arc.
|
Point
|
Point
|
Place Point constructs a civil
point element. The point tool places a cell or text based on a feature
definition or a
MicroStation point (zero length line) if no
feature definition is used. The point can be placed in 2-D (X,Y) or 3-D (X,Y,
elevation) in both 2D and 3D model views.
|
Equal Space
Points
|
The Equal Space Points tool
inserts a specified number of points, points at a defined interval, or a
combination of both. The points can be placed between two points or along an
element and optional offset.
The tool places cells or text based on a feature
definition or
MicroStation points (zero length line) in
the active
MicroStation symbology if no feature
definition is used.
The point can be placed in 2-D (X,Y) or 3-D (X,Y,
elevation) in both 2D and 3D model views.
|
Offsets and Tapers
|
Single Offset Entire
Element
|
Offsets the selected element by
a constant value along the entire length.
|
Single Offset
Partial
|
Offsets the selected element by
a constant value along a user selected station range.
|
Variable Offset
Taper
|
Offsets the selected element by a
variable amount along a user selected station range.
|
Ratio Offset
Taper
|
Offsets the selected element by
a ratio along a user selected station range.
|
Reverse Curves
|
Reverse Curve By
Angle
|
Constructs reverse curves between
previously drawn elements.
|
Reverse Curve By Radii
Ratio
|
Creates a reverse curve where the
second curve radius is a ratio of the first curve radius. Offsets locked at
zero.
|
Reverse Curve By
Tangent
|
Creates a reverse curve where
the two radii are equal and you may specify a tangent length between the
curves, Offsets locked at zero.
|
Line At
Angle
|
Creates a simple linear element
at a deflection angle measured from the first picked element, Offsets locked at
zero.
|
Reverse
Transition
|
Constructs reverse curves
between previously drawn elements with an optional tangent length between the
two curves.
|
Spirals
|
Spiral From
Element
|
Constructs a spiral from a
previously placed element, using this base element to determine tangency at one
end.
|
Spiral Between
Elements
|
Constructs a spiral (or spirals)
between two base elements that determine tangency.
|
Modify
|
Start
Station
|
Assigns stationing to an
element.
|
Add Station
Equation
|
Defines a station equation at a
designated location on an element.
|
Copy
Element
|
The Copy Element tool creates a
new instance of visible geometry only.
|
Insert
Fillet
|
Inserts a curve into a
previously created element.
|
Append
Element
|
Constructs a complex element by
appending additional elements in a previously established complex element.
|
Complex Geometry
|
Complex By
Element
|
Constructs a complex element of
previously placed elements by joining them in sequence.
|
Complex By
PI
|
Creates a linear element with
curves based on user input of PI (point of intersection) locations. The curves
can include transitions or set the radius to zero for no curves at the PI.
|
Complex
Redefine
|
Replicates an element at a
specified distance from the original.
|
Define By Best
Fit
|
Constructs an element that best
fits a course defined by a selected linear object.
|
Create Geometry By
Template
|
Opens the
Pick Template dialog, which is
used to insert the chosen template into the drawing relative to a reference
element. Any point in the template, whose feature definition is set to create
geometry, will produce offset element constructions at the template defined
offset.
|