To Edit an Existing Parameter Set for Hole Features
-
From the DGNLib file that has the parameter set, type paramset table export hole.
The Export Parameter Set Table dialog opens.
- Select a folder and file name for the CSV file.
- Use a text editor, or import the file into a spreadsheet, to edit the information.
- Save the file again as a CSV file.
-
Import the CSV file into a DGNLib file using the key-in paramset table import hole.
The Import Parameter Set Table dialog opens, which lets you select a CSV file to import.
Variable Name in CSV file | Variable Type | dialog label | Values | Tool Setting |
---|---|---|---|---|
Name | String | Parameter Set | . | . |
HoleType | Integer | Hole Type | 0 1 2 |
Simple Counterbore Countersink |
DrillType | Integer | Drill | 0 1 2 |
Through Blind Next Face |
WhichEnd | Integer | Cbore or Csink End | 0 1 2 |
First Face Last Face Both |
Threaded | Integer | Add Thread | 0 1 |
Disabled Enabled |
Depth | Distance | Depth | . | . |
Diameter | Distance | Diameter | . | . |
CDiameter | Distance | Cbore or Csink Diameter | . | . |
CAngle | Angle | Csink Angle | . | . |
CDepth | Distance | Cbore Depth | . | . |
DraftAngle | Angle | Draft Angle | . | . |
Tapped | Integer | Drill Angle | 0 1 |
Disabled Enabled |
TapAngle | Angle | Drill Angle (field) | . | . |
ThreadDiameter | Distance | Thread Dia (field) | . | . |
ThreadDepth | Distance | Thread Depth | . | . |
ThreadPitch | Distance | Thread Pitch | . | . |