Legacy Solid Tools Toolbox
Tools in the Legacy Solid Tools toolbox are deprecated, most of which have been superceded with new parametric tools found in Features and Modify Features toolboxes.
Tools in the Legacy Solid Tools toolbox are used to:
- create linear solid, solid by extrusion along, or solid by thickening surface
- modify, taper, or remove faces of a solid
- construct a single solid from the union, intersection, or difference of existing solids
- place cuts, fillets, or chamfers on existing solids
- edit existing 3D primitive elements
All tools in a toolbox are not always visible by default. To see all tools, right-click in the toolbox and select Show All from the menu.
To | Select in the Legacy Solid Tools toolbox |
---|---|
Create a linear solid. | Linear Solid |
Create a pyramid solid | Pyramid Solid |
Create a wedge solid | Wedge Solid |
Create a polyhedron solid | Polyhedron Solid |
Create a solid by extrusion along path. | Solid by Extrusion Along |
Create a surface by extrusion along path. | Surface by Extrusion Along |
Create a solid by adding thickness to an existing surface. | Solid by Thicken Surface |
Fillet one or more edges of a solid. | Fillet Edges |
Chamfer one or more edges of a solid. | Chamfer Edges |
Hollow out a solid to create a solid with walls of constant thickness. | Shell Solid |
Modify the dimensions of existing 3D primitive elements. | Edit Primitive |
Construct a single solid that is the union of two or more existing (overlapping) solids. | Unite Solids |
Construct a single solid by subtracting the volume of one or more (overlapping) solids from another. | Subtract Solids |
Construct a single solid that is the intersection of two or more existing (overlapping) solids. | Intersect Solids |
Delete an entity from a solid. | Delete Solid Entity |
Replace a selected face of a solid with an existing surface. | Replace Face |
Create a cut, slot, or pocket in a solid. | Cut Solids by Curves |
Taper one or more faces of a solid. | Taper Face |
Create a new edge on an existing solid. | Draw on Solid |
Relocate inwards or outwards one or more faces of a solid. | Modify Solid Entity |
Simplify SmartSolids by removing details such as blends, holes and small facets based on size. | Remove Entity by Size |
Trims two solids to their common intersection or trims one solid to its intersection with a second solid. | Trim Solids |
Change the display of SmartSolids/SmartSurfaces. | Change SmartSolid Display |