MS_PUBLISHDGN_BUSINESSDATA
|
(not applicable)
|
Disables the publishing of business data into
the iModel. This may be useful in models where these is a large amount of
business data and the iModel is intended for visualization only. Values are 0
(OFF) or 1 (ON). The default setting is 1.
|
MS_PUBLISHDGN_CLEAROVERLAYS
|
(not applicable)
|
If set to 1 (default), converts
DWG Overlay attachments to DGN attachments with No Nesting. If set to 0, keeps
the DWG Attachments as Live Nested DGN Attachments with the Ignore When Live
Nesting setting.
|
MS_PUBLISHDGN_DESIGNLINKS
|
(not applicable)
|
If set to 1, turns on the
Include Linked Design Files check box by
default.
|
MS_PUBLISHDGN_DEFAULT_SETTINGS_PATH
|
(not applicable)
|
Applies the default publishing and
packaging settings contained in a settings XML file. Once set, you do not need
to load the settings XML file. You can create a settings XML file using the
Publish iModel dialog.
|
MS_PUBLISHDGN_PUBLISH_DISPLAYED_ATTACHMENTS_ONLY
|
(not applicable)
|
If set to 1, publishes only the
displayed reference attachments. The default setting is 0.
|
MS_PUBLISHDGN_EMBEDFONTS
|
(not applicable)
|
If set to 0, disables the
embedding of fonts into the iModel. This may be useful to reduce the size of
iModel where iModel size may increase significantly due to embedded fonts.
Values are 0 (OFF) or 1 (ON). The default setting is 1.
PUBLISHDGN
EMBEDFONTS <
OFF |
ON >
|
MS_PUBLISHDGN_ENFORCE_VALIDATION
|
(not applicable)
|
If set to 1, enforces validation
checks during publishing iModels for missing library schemas, rasters, point
clouds, or references. If there are any missing items, publishing would fail
and package will not be created. If set to 0 or undefined (the default),
warning messages for the missing attachments will be logged in the Message
Center and package will be created as a replica of the source file.
Note: The removal
configuration variables
MS_PUBLISHDGN_REMOVE_MISSING_LIBRARY_ECXATTRIBUTES and
MS_PUBLISHDGN_REMOVE_MISSING_ATTACHMENTS take precedence
over enforcing validation. For example, let's say that
MS_PUBLISHDGN_ENFORCE_VALIDATION is on and
MS_PUBLISHDGN_REMOVE_MISSING
_ATTACHMENTS is set to remove missing rasters. During publishing, if
a missing raster is encountered, the
MS_PUBLISHDGN_REMOVE_MISSING
_ATTACHMENTS would take precedence and end up removing the raster, so
in this case validation would not fail, the package will be created and just a
warning would be logged. Similarly, for missing schema, if
MS_PUBLISHDGN_REMOVE_MISSING_LIBRARY_ECXATTRIBUTES is
defined with enforce validation, package would be created with missing library
warning messages, and missing data will be stripped off.
|
MS_PUBLISHDGN_EXPORT_PARASOLIDS_TO_MESHES
|
(not applicable)
|
If set to 1, converts parasolids to
meshes. the default setting is 0.
|
MS_PUBLISHDGN_IGNORE_SCHEMAS
|
(not applicable)
|
Allows you to define a list of
supplemental schemas that should not be published. The supplemental schemas
should be separated by semi-colons.
|
MS_PUBLISHDGN_LOAD_REFS
|
(not applicable)
|
Optimizes reference file loading
during the iModel publishing process. If set to 0, references of individual
files are not loaded during publishing. If set to 1, references are loaded.
Suppressing reference loading can improve performance with some files
(particularly those using overlay DWG attachments or limited nest-depth
attachments). Values are 0 (OFF) or 1 (ON). The default setting is 0.
PUBLISHDGN
PUBLISHREFERENCES
<
OFF |
ON >
|
MS_PUBLISHDGN_MESHBSURF_MINORDER
|
(not applicable)
|
Defines a numeric value that specifies the
minimum order for which B-spline surfaces will be converted to meshes during
publishing. If specified, B-spline surfaces at or above this order will be
converted to meshes to optimize visualization performance in the iModel. If not
specified, the default value is 6. Most users will not need to change this
value.
|
MS_PUBLISHDGN_SS3_COMPATIBLE
|
(not applicable)
|
If set to 1, the variable creates
backward compatible iModels. The default setting is 0.
|
MS_PUBLISHDGN_REMOVE_MISSING_LIBRARY_ECXATTRIBUTES
|
(not applicable)
|
If set to 1, strips-off missing
library ECXAttributes during publishing iModel. The default setting is 0.
|
MS_PUBLISHDGN_REMOVE_MISSING_ATTACHMENTS
|
(not applicable)
|
Removes missing point cloud,
rasters, or reference attachments during the publishing or packaging of iModel.
The configuration variable can have the following values:
- 0 or undefined -
Disabled (Nothing is removed)
- 1 - Remove missing
rasters
- 2 - Remove missing
point clouds
- 3 - Remove missing
rasters and point clouds
- 4 - Remove missing
references
- 5 - Remove missing
rasters and references
- 6 - Remove missing
point clouds and references
- 7 - Remove all
|
_EMBEDFILE
|
(not applicable)
|
If the packaged iModel contains embedded
references, this configuration variable will resolve the name of the current
embedded reference file. Otherwise, it will have the same value as _DGNFILE.
|
_PACKAGEFILE
|
(not applicable)
|
If the packaged iModel contains embedded
references, this configuration variable will resolve the name of the current
packaged file. Otherwise, it will have the same value as _DGNFILE.
|