Method |
Sets the placement parameters for the chamfer constraint.
-
Distances — Sets (1) Distance 1, the chamfer distance from the vertex, along the first selected surface, and (2) Distance 2, the chamfer distance from the vertex, along the second selected surface.
-
Distance and Angle — Sets (1) the chamfer Distance from the vertex, along the selected surface, and (2) the angle formed by the chamfer and the selected surface.
-
Chamfer Length — Sets the distance between the two selected surfaces, along the chamfer.
|
Create Dimensions |
When on, chamfer dimensions are placed with the chamfer.
|
Distance 1 |
(Method set to Distances only) Sets the chamfer distance along the surface that is selected first.
|
Distance 2 |
(Method set to Distances only) Sets the chamfer distance along the surface that is selected last.
|
Distance |
(Method set to Distance and Angle only) Sets the chamfer distance with respect to the selected surface.
|
Angle |
(Method set to Distance and Angle only) Sets the chamfer angle with respect to the selected surface.
|
Length |
(Method set to Chamfer Length only) Sets the length along the chamfer.
|
Constraint 1 (dialog setting) |
-
(Method set to Distances) Sets the constraint name for the Distance 1 constraint.
-
(Method set to Distance and Angle) Sets the constraint name for the Distance constraint.
-
(Method set to Chamfer Length) Sets the constraint name for the Length constraint.
|
Constraint 2 (dialog setting) |
|