Add Hatch command settings group |
The following settings are available when the Add Hatch command is selected.
- ID — Sets the ID number of the pane for which hatching is being added.
- Outline — Adds a shape to the perimeter of the hatching when on.
- Threshold — Adds a threshold to the frame when on, and enables the following settings:
- Height – Sets the height of the threshold.
- Overhang – Sets a value for the overhang (a width increase to the frame on one side).
- Delta — Sets the distance between hatching lines.
- Angle — Sets the angle of the hatching lines.
|