Multiple object selection
|
- Cut at
line - You can cut several parts simultaneously at one line without
having to select the function once again.
- Cut at
part - You can cut several parts simultaneously at another part
without having to select the function once again.
- Divide - You
can divide several parts simultaneously without having to select the function
once again.
- Polycuts - You
can cut an object simultaneously at several poly-lines without having to select
the function once again.
|
Execute in loop
|
- Cut at
line - The
"Cut at Line" command is repeated until it is explicitly
interrupted.
- Cut at
part - The
"Cut at part" command is repeated until it is explicitly
interrupted.
- Divide - The
"Divide" command is repeated until it is explicitly
interrupted.
- Connect - The
"Combine Shape" command is repeated until it is explicitly
interrupted.
- Shorten - The
"Shorten Shape" command is repeated until it is explicitly
interrupted.
- Lengthen - The
"Extend Shape" command is repeated until it is explicitly
interrupted.
- Polycuts - The
"Polygonal Cut-Outs" command is repeated until it is
explicitly interrupted.
- Miter
cuts - The
"Mitred Cut" command is repeated until it is explicitly
interrupted.
- Insert
corner - The
"Insert Corner" command is repeated until it is explicitly
interrupted.
- Delete
corner - The
"Delete Corner" command is repeated until it is explicitly
interrupted.
- Place
Chamfer - The
"Place Chamfer" command is repeated until it is explicitly
interrupted.
- Round
Edge - The
"Round Edge" command is repeated until it is explicitly
interrupted.
|
End dialog automatic
|
When on, the dialog is immediately closed after an
action.
Note: When off, you must exit manually, but can not immediately
select another command.
|