Connection 1 | Length (L1) |
Positive <numeric value>
- Sets length of connection for End1.
|
Connection 2 | Length (L2) |
Positive <numeric value>
- Sets length of connection for End2.
|
Connection | End Type |
fl -<numeric value>
- Sets and sizes end with a flange connection.
m -<numeric value>
- Sets and sizes end with a male connection.
fe -<numeric value>
- Sets and sizes end with a female connection.
Separate End Type entries for each End Spec with a semi colon. Example: ce-0.2;fe-.03 creates a compression at End1 with size 0.2, and a female connection at End2 with a clearance of 0.3.
|
Dome Height |
Positive <numeric value>
- Sets height of upper surface elevated above the cap nut.
|
Inlet | Outer Diameter |
Positive <numeric value>
- Sets outside diameter of main pipe, usually D1.
|
Nut | Diameter |
Positive <numeric value>
- Sets outside diameter of nut in fitting.
|
Nut | Length |
Positive <numeric value>
- Sets length of nut in fitting.
|
Outlet | Outer Diameter |
Positive <numeric value>
- Sets outside diameter of reduced branch.
|
Tag |
<alpha-numeric characters>
- Sets tag value visible in output of drawing composition in dynamic view. Separate tag strings with a semi colon
|
Tapered Length |
Positive <numeric value>
- Sets length of tapered portion of fitting along center line.
|
Total Length (L) |
Positive <numeric value>
- Sets the overall length of fitting. Compression fittings include End lengths along with nut length when computed total length.
|