Layout and Position
|
- Layout -
Selects the type of chamfer to be used:
Straight Chamfer,
Convex Chamfer, or
Concave Chamfer.
- Radius/1st edge
- Sets the radius at convex/concave version or the length of the first edge at
straight version.
- 2nd
edge - Sets the length of the second edge of the straight chamfer.
- (Swap
Values) - Used to swap the values between the first and second
chamfer edges. Clicking the icon switches the values in the dialog and on the
element being edited in the model.
-
(Chamfer plate) - Used to select the edges on a plate to
add a chamfers. The chamfer input fields are activated so you can change the
layout of the chamfer.
|
Round Edges
|
- Radius - Sets
the round radius.
- Min.
radius - (Read only) Displays the minimum possible radius.
- Height - Sets
the height above the straight edge.
- Max.
height - (Read only) Displays the maximum possible height.
- (Round edge of
plate) - Used to select the edges on a plate to add a rounds. The
round edge input fields are activated so you can define the rounding off either
via the radius or via the height of the rounding above the straight edge.
|