CenterDampers
|
Select this option to center dampers inside the
device body by calculating the total thickness of dampers, the spaces between
them, and subtracting the sum from the body width. The DataGroup property
Damper|Side Space is modified.
|
EqualSpaces
|
Select this option to equate spaces between dampers
to the damper width. The damper side space is automatically set to a minimum
distance.
|
Adjust Width
|
Select this option to adjust overall width of area
inside device filled with dampers.
|
NumberOfDampers
|
Select this option to open the Calculate Damper Parameters dialog. Key in values for the
desired damper properties and
Calculate the remaining ones, followed by
Apply to update the focused device.
Calculate
Damper Parameters dialog.
- Silencer
Width — Sets the internal silencer width.
- Damper
Space — Sets the spacing between dampers.
- Damper
Width
— Sets damper thickness.
- Side
Space
— Sets the space between the device enclosure and
silencer.
Note: Side
space field is disabled, and used for reference only. The value is taken from
the active component.
- No. Of
Damper Blades
— Sets number of dampers.
Note: Limited
by
Auto Size property.
- Calculate —
Calculates the other damper parameters relative to the current entry.
- Apply
— Applies damper parameters to the active
component being placed or modified.
|