Select Haunch
|
Sets the side of bottom chord to set up from two
options;
- Top
Haunch – When checked, the haunch will be created on the upper side
of the shape to be connected.
- Bottom
Haunch – When checked, the haunch will be created on the lower side
of the shape to be connected.
|
Coped Shape
|
When checked, a coped shape is used as bottom flange
haunch instead of a haunch of flat steel or plate. Additional stiffening plates
can be inserted for a cropped shape.
|
Rectangular Plate
|
When checked, a rectangular plate is inserted as
bottom flange haunch. Enabled when
Coped Shape is unchecked.
|
Normal to Column
|
When checked, a rectangular plate is inserted with
the edges parallel to the support. Enabled when
Coped Shape is checked.
|
As Polyplate
|
When checked, the inserted shapes of the bottom
flange haunch are transformed into plates. Enabled when
Coped Shape is unchecked.
|
Stiffener in Support Shape
|
When checked, in the supporting shape, stiffeners are
inserted on the level of the bottom flange haunch. Select the style under Ribs.
|
Stiffener in Connect Shape
|
When checked, in the connecting shape, stiffeners
are inserted on the level of the bottom flange haunch. Select the style under
Ribs.
|
Haunch Length
|
Sets the length of the bottom flange haunch.
|
Cut Width
|
Sets the width of the bottom flange haunch at the
intersection side.
|
Top Height
|
Sets the width of the bottom flange haunch at the top
side.
|
Flange Width
|
Sets the width of the bottom flange haunch flange.
Enabled when
Coped Shape is unchecked.
|
Flange Thickness
|
Sets the flange thickness of the bottom flange
haunch. Enabled when
Coped Shape is unchecked.
|
Plate Thickness
|
Sets the thickness of the web plate of the bottom
flange haunch. Enabled when
Coped Shape is unchecked.
|
Facet Size
|
Sets the chamfer preset at the supporting side of
the web plate.
|
Facet Horizontal
|
Sets the horizontal component of the chamfer length
at the connection side.
|
Facet Vertical
|
Sets the vertical component of the chamfer length at
the connection side
|
Supp. Plate Width/Length/Thick
|
Sets the dimensions of the stiffening plate: Width,
Length and Thickness. Enabled when
Coped Shape is checked.
|
Supp. Plate as Poly
|
When checked, creates the stiffening plate as a
polyplate rather than a flat plate.
|
(Select bottom chord)
|
Used to select a bottom chord shape for assignment.
Opens
Identify bottom chord shape dialog, where
a desired type/class and size shape is selected.
|