Used to position and set offset to the members of
circular platform.
The Position tab allows to rotate the shapes of the
different parts of the circular platform in the step of 0°, 90°, 180° or 270°.
Useful, as each part of shapes has its own method about insertion
point. For peripheral shape, its insertion point is outer top corner. While for
internal members, their insertion point is on the center point of top edge.
Setting | Description |
---|
Outer Arc Member
|
- Rotation – Sets
the position of outer peripheral arc shape, in angle (at 90° increments).
- Side
Offset – Sets the distance of outer edge of outer peripheral arc
shape and outer edge of tread plate. A numeric value determines the distance.
The default is 0.
|
Inner Arc Member
|
- Rotation – Sets
the position of inner peripheral arc shape, in angle (at 90° increments).
- Side
Offset – Sets the distance of inner edge of outer peripheral arc
shape and inner edge of tread plate. A numeric value determines the distance.
The default is 0.
|
Start Edge Member
|
- Rotation – Set
the position of starting edge member, in angle (at 90° increments).
|
End Edge Member
|
- Rotation – Set
the position of ending edge member, in angle (at 90° increments).
|
Inner Member
|
- Rotation – Sets
the position of outer peripheral arc shape, in angle (at 90° increments).
- Inner Mem
Height Offset – Sets the distance of upper edge of internal members
and lower edge of tread plate. A numeric value determines the distance. The
default is 0.
|