Field Reference
The following table is a reference to the fields contained in factory-shipped Bentley catalogs and specifications:
Field | Description | Notes |
ALT_P_MARK |
Alternate piece mark |
|
BASE_DIA |
Diameter of base |
|
BASE_LEN |
Length of base |
|
BASE_LEN |
Length of base |
|
BASE_OD |
Diameter of base |
|
BASE_THK |
Thickness of base length |
|
BASE_WEB |
Thickness of base diameter |
|
BOLT_D_X_L |
"Bolt Diameter" X "Bolt length" |
|
BOLT_DIA |
Bolt diameter |
|
BOLT_INC |
Bolt increment factor |
|
BOLT_LEN |
Bolt length |
|
BOLT_TYPE |
Bolt type |
|
BOLT_UNITS |
Bolt units |
|
BOLT_XCESS |
Reserved for future use |
|
BOWL_DEPTH |
Depth of the bowl or basket |
|
BP1_END |
Center of radius to end |
|
BRAN_SIZE |
Branch size |
|
CATALOG |
Catalog from which data was compiled |
|
CENT_THK |
Thickness of the collar on unions |
|
CLAMP_WDTH |
Length of clamp connection |
|
COMP_ID |
Component inside diam. |
|
COMP_LEN |
Component length |
|
COMP_OD |
Component outside diam. |
|
COUP_OD |
Diameter of strainer's branch |
|
COUP_TH |
Thickness of strainer's branch |
|
CTR_END_B |
Center to end (branch) |
|
CTR_END_M |
Center to end (main) |
|
CTR_END_R |
Center to end (redu.) |
|
CTR_TO_CTR |
Center to Center |
|
DIAPH_LEN |
Diaphragm Length |
|
DNSTRM_CON |
Downstream connection |
|
DNSTRM_LEN |
Downstream length |
|
EC_CLASS_NAME |
OPM Class Name |
|
END_COND_1 |
End Condition |
|
END_COND_2 |
End Condition |
|
END_COND_3 |
End Condition |
|
F_EL_F_ELB |
Facing of elbow to facing of elbolet |
|
FACING_1 |
Facing |
|
FACING_2 |
Facing |
|
FACING_3 |
Facing |
|
FLANGE_LEN |
Flange length |
|
FLATS |
Diameter from flat-side to flat-side on unions |
|
FLNG_OD_M |
Flange outside diam (main) |
|
FLNG_OD_R |
Flange outside diam. (redu.) |
|
FLNG_TH_M |
Flange thickness (main) |
|
FLNG_TH_R |
Flange thickness (redu.) |
|
GASKET_THK |
Gasket thickness |
|
GRV_WDTH_B |
Length of grooved (bran) |
|
GRV_WDTH_M |
Length of grooved(main) |
|
GRV_WDTH_R |
Length of grooved (reduced) |
|
GSK_SEAT_B |
Length of gasket(bran) |
|
GSK_SEAT_M |
Length of gasket(main) |
|
GSK_SEAT_R |
Length of gasket(reduced) |
|
HANDWL_LEN |
Handwheel length |
|
HANDWL_OD |
Handwheel outside diam |
|
HGHT_HEAD |
The height of the head on plugs |
|
INS_LEN1 |
||
LONG_DESCR |
Long description |
|
MANU_FACT |
Manufacturer |
|
MATERIAL |
Material |
|
MEAS_UNITS |
Units of measure; imperial (IM) or metric (ME) |
|
METER_LEN |
Meter length |
|
METRIC_EQV |
Metric equivalent |
|
NOTES |
Bentley catalog notes |
|
NUT_LEN |
Nut length |
|
OFF_SET |
Offset |
(Pipe_od_m-Pipe_od_r)/2 for eccentric reducer |
OPERATOR |
Operator |
|
OPTIONCODE |
Default choice for drawing preference |
For AP3D components, a "1" in this field will make it the default spec choice |
OUTLET_RAT |
Outlet rating |
|
PIECE_MARK |
Piece mark |
Gtype,Stype,Main_size |
PIPE_OD_B |
Pipe outside diam. (bran) |
|
PIPE_OD_M |
Pipe outside diam (main) |
|
PIPE_OD_R |
Pipe outside diam (redu) |
|
PIPE_SEPR |
Gap between connected components |
|
PLATE_THK |
Plate thickness |
|
PROJ_TOP_B |
Projection from top to bottom |
|
QTY_PERSET |
Quantity per set |
|
RADIUS |
Radius of elbow |
|
RATING |
Rating |
|
REV |
Bentley revision code. |
|
ROOT_GAP |
Gap distance between fitting and olet |
|
RUN_RATING |
Run rating |
|
RUN_SIZE |
Run Size |
|
SCHEDULE |
Schedule |
|
SETBACK |
The set back depth |
|
SHOP_FLD |
Shop/Field designation |
|
SHORT_DESC |
Short description |
|
SKT_DPTH_B |
Socket depth (branch) |
|
SKT_DPTH_M |
Socket depth (main) |
|
SKT_DPTH_R |
Socket depth (redu.) |
|
SORT_CODE |
Sort Code |
|
SPEC_CRITERIA_ROW |
Criteria Row |
Required for different functions in OpenPlant Support Engineering and should not be edited by the user. |
SPEC_GROUP |
Section Name |
Required for different functions in OpenPlant Support Engineering and should not be edited by the user. |
STUB_THK |
Stub thickness |
|
SYS_ID |
Unique System ID code |
Unique component indexing field used by AP97 applications |
TAG |
Tag |
|
TAKEOUT |
Takeout |
|
TAKEOUT2 |
Takeout |
|
TANGENT |
Distance from end of to tangent |
|
THD_ENG_B |
Thread engagement (branch) |
|
THD_ENG_M |
Thread engagement (main) |
|
THD_ENG_R |
Thread engagement (reduced) |
|
TRIM_1 |
Trim |
|
TRIM_2 |
Trim |
|
TRIM_3 |
Trim |
|
UPSTRM_CON |
Upstream connection |
|
UPSTRM_LEN |
Upstream length |
|
WEIGHT_DRY |
Reserved for future use |
|
WELD_THK |
Weld thickness |
|
WELD_THK |
Weld thickness |