In the Distance 1 and Distance 2 fields, enter the required values.
If required, turn on Select Tangent Edges.
Select an edge to chamfer.
The solid highlights, with the selected edge highlighted.
Do one of the following:
Accept to chamfer the edge.
or
Select further edges to be chamfered using <ctrl+data points>.
Accept to chamfer the edges.
Applying a chamfer to an edge of a solid (Top) and a projected surface (Bottom). | Left: Select the edge (1), which highlights. | Right: Accept to chamfer the selected edge (2).
Effect of Select Tangent Edges setting. | Left: Off — only the selected section of the edge is selected for chamfering. | Right: On — the selected section plus all edges that are tangentially continuous are selected for chamfering.