How To Place a Beam C-Clamp
- Select one of the two Beam C-Clamp options from the Support Hardware palette.
- Select the beam the clamp will be placed on and right-click to confirm.
- (Optional) Select the reference pipe for the clamp or right-click for placement along the beam.
- In the Properties dialog, click in the Primary Size field and select an option from the grid.
- Click OK.
- In the Path Placement dialog, define the following options:
- Use the Rotation fields to adjust the rotation of the clamp as necessary so it is orientated correctly in relation to the flange.
- Determine the placement position along the length of the beam using either the mouse or the Distance field in the dialog above.
- If using a defined distance, be sure is Relative to the correct starting location on the flange. If using the Reference option, you will be prompted to pick a reference point to use.
- If using the mouse, slide the clamp along the beam to the correct location and left click to select the location and again to confirm the placement.