Defects Fixed in 2023 Release
This section provides a list of defects that have been resolved in this release of OpenRail Overhead Line Designer.
OpenCivil Defects
Following is the list of defects resolved in the 2023 release.
Civil\OpenCivil Designer\Civil Development | OBM Files getting incorrectly branded as ORD. |
Civil\OpenCivil Designer\Drainage and Utilities | Poor zoom and pan performance with referenced drainage and terrain. |
Civil\OpenCivil Designer\Drainage and Utilities | Imported utility submodels are on the wrong elevation (zero). |
Civil\OpenCivil Designer\Drainage and Utilities | Item types in referenced data are not available in field editor to create text favorites. |
Civil\OpenCivil Designer\Drainage and Utilities | Incorrect construction length/slope reported when using connection points in the cell. |
Civil\OpenCivil Designer\Drainage and Utilities | Add a tooltip for Level Filter in the Conflict Detection dialog. |
Civil\OpenCivil Designer\Drainage and Utilities | The list of available feature definitions is not filtered by the table type. |
Civil\OpenCivil Designer\Drainage and Utilities | ModelBuilder does not set the correct prototype for each feature definition when reading data. |
Civil\OpenCivil Designer\Drainage and Utilities | Extract From Graphics shows incorrect 'Size' utility property versus placing a conduit between nodes. |
Civil\OpenCivil Designer\Drainage and Utilities | "Depth (Structure)" value may be incorrect in Microstation/Civil properties. |
Civil\OpenCivil Designer\Drainage and Utilities | When using ModelBuilder to import utility conduits,the Set Invert to Start/Stop isn't being mapped correctly. |
Civil\OpenCivil Designer\Drainage and Utilities | Slope (Calculated) displaying incorrectly when units are set to (mm/m)(H:V) |
Civil\OpenCivil Designer\Drainage and Utilities | Node Set Out coordinates are incorrect when a node is rotated. |
Civil\OpenCivil Designer\Drainage and Utilities | Setting a Sump Depth to zero does not work correctly. |
Civil\OpenCivil Designer\Drainage and Utilities | Inner and outer element symbology is not applied to elliptical conduits. |
Civil\OpenCivil Designer\Drainage and Utilities | The endwall invert doesn't update when the feature definition is changed. |
Civil\OpenCivil Designer\Drainage and Utilities | Wrong conduit shape is drawn in the 3D model. |
Civil\OpenCivil Designer\Drainage and Utilities | When using Extract Utilities from Graphics, both ends of the extracted pipe are assigned the same elevation. |
Civil\OpenCivil Designer\Drainage and Utilities | DGN with drainage data is incorrect after performing a downgrade to 10.10.21.04. |
Civil\OpenCivil Designer\Drainage and Utilities | Don't update the model if a compute fails. |
Civil\OpenCivil Designer\Drainage and Utilities | Incorrect offsets and relative elevations when a cross section node uses a terrain model. |
Civil\OpenCivil Designer\Drainage and Utilities | Incorrect channel shape in the 3D model when linked to cross section nodes. |
Civil\OpenCivil Designer\Drainage and Utilities | Don't open the Civil Message Centre automatically when the Compute button is used. |
Civil\OpenCivil Designer\Drainage and Utilities | Critical Storm Analysis does not include Transition Nodes, but the Critical Storm Analysis Wizard does |
Civil\OpenCivil Designer\Drainage and Utilities | The Inlet Opening Area for a grate does not vary with the Grate Type - a factor from a P-50 grate is always used |
Civil\OpenCivil Designer\Drainage and Utilities | Critical Storm Analysis Wizard doesn't work if the data includes a Pond Outlet Structure |
Civil\OpenCivil Designer\Drainage and Utilities | "About Drainage and Utilities" dialog doesn't show the correct OpenFlows version number. |
Civil\OpenCivil Designer\Drawing Production\Annotation | Frame annotation for drainage notes is not working correctly. |
Civil\OpenCivil Designer\Drawing Production\Annotation | Civil Expressions are no longer working on linear templates. |
Civil\OpenCivil Designer\Drawing Production\Annotation | Drainage shape property text favorite is not working. |
Civil\OpenCivil Designer\Drawing Production\Annotation | Grid labels are not aligning to the sheet plan grid. |
Civil\OpenCivil Designer\Drawing Production\Annotation | Exception occurs when copying annotation in an activated reference file. |
Civil\OpenCivil Designer\Drawing Production\Annotation | Horizontal points not working correctly with profile frame annotation. |
Civil\OpenCivil Designer\Drawing Production\Annotation | Exception occurs attempting to annotate cross sections in large dataset. |
Civil\OpenCivil Designer\Drawing Production\Annotation | OpenRail Slues annotate incorrectly on long profile. |
Civil\OpenCivil Designer\Drawing Production\Civil Labeler | Node feature definition label is blank when placed using Civil Labeler. |
Civil\OpenCivil Designer\Drawing Production\Civil Labeler | Node feature name & description values do not annotate with Civil Labeler. |
Civil\OpenCivil Designer\Drawing Production\Civil Labeler | Elevations created with Civil Labeler in a Profile 3D Cut are incorrect when placed in an exaggerated profile. |
Civil\OpenCivil Designer\Drawing Production\Civil Labeler | Exception occurs using Civil Labeler in cross section models with missing references. |
Civil\OpenCivil Designer\Drawing Production\Named Boundaries and Sheets | Remove constraint that sheet cannot be added to the sheet index if it is from another workset. |
Civil\OpenCivil Designer\Drawing Production\Named Boundaries and Sheets | Initial display of plan sheet incorrectly displays all levels when certain levels are off in the Default model |
Civil\OpenCivil Designer\Drawing Production\Named Boundaries and Sheets | Plan Sheets are controlled by the NEWEST View Group that contains View 1 - Default. |
Civil\OpenCivil Designer\Drawing Production\Named Boundaries and Sheets | Exception occurs when name boundary is created using Civil Plan by Element option. |
Civil\OpenCivil Designer\File | Exception occurs when checking files into ProjectWise. |
Civil\OpenCivil Designer\Geometry | Exception occurs when importing a geometry LandXML from C3D that contains point groups. |
Civil\OpenCivil Designer\Geometry | Geometry with station equations using the Index Method is exported to LandXML and then, when imported, is given station equations that use the Name method. |
Civil\OpenCivil Designer\Geometry | Profile projections can give incorrect results with geometry that loops back and gives multiple intersection solutions. |
Civil\OpenCivil Designer\Geometry | Partial Offset loses it's integrity on an S-Curve. |
Civil\OpenCivil Designer\Geometry | Profile Curve Between Elements doesn't find a solution with elements created by Profile by Slope from Element, Profile by Variable Slope from Element and Profile by Vertical Offset from Element. |
Civil\OpenCivil Designer\Geometry | Geometry Imported from an MX .fil contains incorrect coordinates. |
Civil\OpenCivil Designer\Geometry | Windows regional settings can cause an exception to occur when using the Modify PI command in the Table Editor. |
Civil\OpenCivil Designer\Geometry | Exception occurs whe importing Swedish Transport Administration LandXML. |
Civil\OpenCivil Designer\Geometry | Station Equation name is not exported in LandXML. |
Civil\OpenCivil Designer\Item Types | Volume by item types is not calculated when corridor components contain gaps. |
Civil\OpenCivil Designer\Modeling\Corridors | Processing corridor give exception at 90% while processing mesh. |
Civil\OpenCivil Designer\MicroStation Tools | Error Message "Bentley.OgrECPlugin ECRepository Ref File Attachment Data Conversion queries validation failed" occurs when referencing a shape file to dgn. |
Civil\OpenCivil Designer\MicroStation Tools | Exception occurs while merging reference into master. |
Civil\OpenCivil Designer\Modeling\Civil Cells | Civil cell name that ends with a "blank" causes exception to occur at placement. |
Civil\OpenCivil Designer\Modeling\Civil Cells | Exception occurs during civil cell placement when trying to view alternatives. |
Civil\OpenCivil Designer\Modeling\Corridors | Exception occurs when deleting key stations. |
Civil\OpenCivil Designer\Modeling\Corridors | Product is hanging in corridor file after selecting 3d element and panning. |
Civil\OpenCivil Designer\Modeling\Corridors | Exception occurs when changing corridor feature definition from final to design. |
Civil\OpenCivil Designer\Modeling\Corridors | Cannot delete key stations using the Corridor Objects dialog or Explorer. |
Civil\OpenCivil Designer\Modeling\Corridors | Corridor clipping gives an exception when attempting to use 3d circular tunnel as a clipping reference. |
Civil\OpenCivil Designer\Modeling\Corridors | An Overlay Stripping Component is not following the last point constraint within the component. |
Civil\OpenCivil Designer\Modeling\Other | Exception occurs when attempting to use dynamic cross sections. |
Civil\OpenCivil Designer\Modeling\Templates | Deleting a Corridor Template Drop while Explorer is open and the OpenRoads Model\Corridors\Design\<Corridor Name>\Templates node is expanded causes a .NET framework error. |
Civil\OpenCivil Designer\Modeling\Templates | Closed shape components are not recording any volume. |
Civil\OpenCivil Designer\Other | Deleting a drainage item will then cause any subsequent UNDO action to undo all work since session started. |
Civil\OpenCivil Designer\Rail\Cant | When working in Metric units and set speed to Mph, Cant Editor uses Km/h. |
Civil\OpenCivil Designer\Rail\Regression | Regression Report slue signage should be same as dynamic slue signage |
Civil\OpenCivil Designer\Rail\Regression | Issue with Create Regression Line from Rails using NSW Cubic parabola |
Civil\OpenCivil Designer\Rail\Regression | Horizontal Regression Report at Interval is not correct |
Civil\OpenCivil Designer\Rail\Regression | Vertical Regression Report at Interval is not correct |
Civil\OpenCivil Designer\Rail\Regression | Regression curvature diagram, changing size of the bounding box will not remove exaggeration from regression line |
Civil\OpenCivil Designer\Rail\Regression | Curvature Diagram, vertical view decorators should display radius |
Civil\OpenCivil Designer\Rail\Regression | Creating geometry elements via Curvature Diagram, will assign wrong Slews |
Civil\OpenCivil Designer\Rail\Regression | Horizontal Regression Report, Instantaneous Radius removed from first and last point |
Civil\OpenCivil Designer\Rail\Regression | Prefix is missing for Slews and Lifts |
Civil\OpenCivil Designer\Rail\Schematics | Schematic Edges going in the wrong direction compared the turnout branch |
Civil\OpenCivil Designer\Rail\Signaling | LVA Equipment is not exposing Stationing value |
Civil\OpenCivil Designer\Rail\Signaling | LVA Objects missing Feature Name in Explorer |
Civil\OpenCivil Designer\Rail\Turnouts | Turnout ratio properties don't use decimal settings |
Civil\OpenCivil Designer\Rail\Turnouts | LLS Extension - Radius always calculated using swiss method even german is set for that turnout |
Civil\OpenCivil Designer\Topology | Topology Edge and Node is missing properties |
Civil\OpenCivil Designer\References | Station base report raw-xml crossSlope value is wrong. |
Civil\OpenCivil Designer\Reports | Corridor Component Quantities Report totals does not include component if it is not present in last section of corridor. |
Civil\OpenCivil Designer\Survey | Terrain is not getting completely removed when deleting the Fieldbook. Some graphics are left behind and the terrain is still listed in Explorer. |
Civil\OpenCivil Designer\Survey | Linear annotation is deleted when importing additional survey data or updating standards from libraries. |
Civil\OpenCivil Designer\Terrain | Import Topo not working with modified coordinate systems. A message was added to notify user that the modified coordinate system is not supported. |
Civil\OpenCivil Designer\Terrain | The override symbology on the terrain is not putting the graphics on the proper level. |
Civil\OpenCivil Designer\Rail\OLE | Stop removing leading or trailing whitespace in Pathway names |
Civil\OpenCivil Designer\Rail\OLE | Fixed creation of feeder lines: types specified in first dialog will now stick during the creation process |
Civil\OpenCivil Designer\Rail\OLE | Fixed tabular edit dialogs handling of NaN values |