Edit Feature Parameters
Used to edit the parameters of a selected parametric element or feature. Editing of features is supported by edit feature dialogs, displaying the parameters that can be edited for the feature that was selected.
The parameters correspond to the tool settings for the
tool used to create the feature:
Parametric element | Dialog | Parameters/Settings to edit |
---|---|---|
Slab | Edit Slab | Length, Width, Height |
Cylinder | Edit Cylinder | Radius, Height |
Sphere | Edit Sphere | Radius |
Cone | Edit Cone | Color, Transparency, Material, Name, Top Radius, Base Radius, Height |
Elliptical Cone | Edit Elliptical Cone | Color, Transparency, Material, Name, Top Primary Radius, Top Secondary Radius, Base Primary Radius, Base Secondary Radius, Height |
Torus | Edit Torus | Primary Radius, Secondary Radius, Sweep Angle |
Linear Solid or Extruded Solid/Surface | Edit Extrude Feature | Color, Transparency, Material, Name, Distance, Thickness, Scale, Angle |
Extruded Along Solid/Surface | Edit Extrude Along Feature | Color, Transparency, Material, Name, Thickness, Alignment, Scale, Spin, Lock Profile Rotation, Allow Self-Intersection |
Revolved Solid/Surface | Edit Revolve Feature | Color, Transparency, Material, Name, Angle, Thickness |
Feature | Dialog | Parameters/Settings to edit |
Cut | Edit Cut Feature | Color, Transparency, Material, Name, Cut Method, Cut Direction, Cut Mode, Cut Depth |
Fillet | Edit Fillet Feature | Color, Transparency, Material, Name, Radius, Select Tangent Edges |
Chamfer | Edit Chamfer Feature | Color, Transparency, Material, Name, Method, Length, Select Tangent Edges |
Hole | Edit Hole Feature | Varies depending on the Hole Type and Drill attributes |
Protrusion | Edit Protrusion Feature | Direction |
Shell | Edit Thin Shell | Color, Transparency, Material, Name, Shell Thickness, Shell Outward |
Swept edge | Edit Sweep Edge Feature | Mode |
Tapered face | Edit Taper Feature | Color, Transparency, Material, Name, Draft Angle, Add Smooth Faces |
Spin face | Edit Spin Face Feature | Color, Transparency, Material, Name, Angle |
Note: If an element has
all of its edges and vertices rounded or chamfered, you cannot select it
graphically as there are no edges to select. To modify the element’s
parameters, you must either expose one or more edges by
disabling the appropriate type of feature.