Hole Feature
Setting | Description |
---|---|
Parameter Set | Lets you select a pre-defined hole, with defined parameters. For information on creating parameter sets for hole features, see Parameter sets for hole features. |
Hole Type | Sets the type of hole to create.
|
Drill | Sets whether or not a hole is drilled through a feature-based solid. |
Direction | Sets the hole's direction. |
Diameter | Set the hole's diameter. |
Depth | (Drill > Blind only) Sets the depth a hole is drilled. |
Draft Angle | Sets the angle of the sides of the hole relative to orthogonal. A value of 0 means that sides of the hole are orthogonal to the identified face. |
Drill Angle | (Drill > Blind only) If on, sets the drill point angle. The default is 118 degrees. |
Add Thread | When selected, makes threaded hole options visible. |
Cbore. End | (Drill > Next Face or Through only) Defines which end of the hole has a counterbore. |
Cbore. Diameter | Sets the diameter for the counterbore hole. |
Cbore. Depth | Sets the depth of the counterbore. |
Csink. End | (Drill > Next Face or Through only) Sets which end of the hole has a countersink. |
Csink. Diameter | Sets the diameter for the countersink hole. |
Csink. Angle | Sets the countersink's included angle. |
Thread Diam. | Sets the thread diameter. |
Thread Depth | Sets the thread depth. |
Thread Pitch | Sets the thread pitch. |
Equation icons |
Lets you assign variables or equations to the corresponding setting. For more information, see Variables and Equations. |