T.2 Generate the model geometry
-
On the
Model ribbon tab, select the
Grid tool in the
Create group.
![](GUID-22B0D020-F305-4FE8-8C07-D8E31280DDD0-low.png)
The
Create Grid dialog opens.
-
Supply the grid details:
-
Type
Grid 1 in the
Name field.
-
Leave the
Plane selection as
XY and the
Creation Method as
By Spacing.
-
Type
6 in the
Number of spaces in X and
1 m in the
Grid spacing X fields.
-
Type
7 in the
Number of spaces in Y and
0.5 m in the
Grid spacing Y fields.
-
Click
OK.
The grid is created.
-
Use the
Member tool to create the first portal frame:
-
On the
Model ribbon tab, select the
Member tool in the
Create group.
![](GUID-7D59AD5C-FB97-4D89-8049-F7D612E3D3E0-low.png)
-
Click on the following points on Grid 1, in sequence.
Double-click the final point to stop creating
connected members.
- (0,0,0)
- (0,3.5,0)
- (6,3.5,0)
- (6,0,0)
-
Select the
Member tool again to deactivate the tool.
-
On the
View ribbon tab, select the
Grids tool in the
Reference group.
![](GUID-F6F8AC4A-B98D-43BA-A52D-7A916C7731EC-low.png)
The tool is no longer highlighted and all
grids are hidden in the display.
-
Switch on the node and beam labels:
-
On the
View ribbon tab, select the drop-down list
below the
Numbering tool in the
Model group.
![](GUID-2FCE218D-B14B-48D1-80A3-50CA658028A8-low.png)
-
Select
Node and
Member on this list.
They are both marked with a check.
-
Select the
Numbering tool.
-
On the
Model ribbon tab, select the
Circular Copy tool in the
Edit group.
![](GUID-91394118-6F79-45BA-BBBC-BC5AA3DF73BE-low.png)
The
Copy Model Circular dialog opens.
-
Specify the circular copy details:
-
Leave the
Method selection as
Global.
-
Select
Y as the
Axis of rotation.
-
Type
6 m in the Pivot point
X field.
-
Type
90 deg in the
Arc angle field.
-
Type
1 in the
Copies field.
-
Click
OK.
The dialog closes and the selection elements
of the portal frame are copied at 90° from the right end.
-
In the lower, right corner of the view window, click the
Switch to isometric view tool to display the
frame in an isometric view.