EX. To create model used for pushover example
To quickly set up the model used for this example, use the following procedure.
Only one pushover
definition can be added to a model. Therefore, this example with start with a
model you can add the pushover definition to. The end result will be
functionally equivalent to the example model installed with the program.
- Start an empty STAAD.Pro model in the analytical modeling worfklow. Refer to GS. To create a new STAAD.Pro model for additional details.
-
On the
Utilities ribbon tab, select the
Command File tool in the
Edit group.
The STAAD.Proエディタ window opens. -
Click
Copy to Clipboard below.
STAAD PLANE START JOB INFORMATION ENGINEER DATE 07-Oct-05 END JOB INFORMATION INPUT WIDTH 79 UNIT INCHES KIP JOINT COORDINATES 1 0 0 0; 2 0 118.11 0; 3 118.11 118.11 0; 4 118.11 0 0; 5 0 236.22 0; 6 118.11 236.22 0; 7 0 354.331 0; 8 118.11 354.331 0; 9 0 472.441 0; 10 118.11 472.441 0; 11 236.22 118.11 0; 12 236.22 0 0; 13 236.22 236.22 0; 14 236.22 354.331 0; 15 236.22 472.441 0; MEMBER INCIDENCES 1 1 2; 2 2 3; 3 3 4; 4 2 5; 5 5 6; 6 6 3; 7 5 7; 8 7 8; 9 8 6; 10 7 9; 11 9 10; 12 10 8; 13 3 11; 14 6 13; 15 8 14; 16 10 15; 17 11 12; 18 13 11; 19 14 13; 20 15 14; DEFINE MATERIAL START ISOTROPIC STEEL E 29732.7 POISSON 0.3 DENSITY 0.000283 ALPHA 1.2e-005 DAMP 0.03 END DEFINE MATERIAL MEMBER PROPERTY AMERICAN 2 5 13 14 TABLE ST W16X26 8 11 15 16 TABLE ST W16X26 1 3 4 6 17 18 TABLE ST W24X55 7 9 10 12 19 20 TABLE ST W24X55 CONSTANTS MATERIAL STEEL MEMB 1 TO 20 SUPPORTS 1 4 12 FIXED LOAD 1 LOADTYPE GRAVITY SELFWEIGHT Y -1 MEMBER LOAD 2 5 8 11 13 TO 16 UNI GY -0.2 FINISH
-
In the
STAAD.Proエディタ window,
select the
Paste tool on the
Home ribbon tab.
The model contents are pasted into the editor. - Save and close the STAAD.Proエディタ.