|
-
Modify Solid
-
Used to manipulate
faces, edges or vertices of a solid by pushing or pulling them interactively.
|
|
-
Cut Solid
-
Used to cut solids using
a profile. It requires at least one 2D profile and a solid to operate.
|
|
-
Fillet
-
(3D only) Used to fillet, or
round, one or more edges of a solid, projected surface, or a surface of
revolution.
|
|
-
Chamfer
-
(3D only) Used to chamfer one
or more edges of a solid, projected surface, or a surface of revolution.
|
|
-
Hole
-
Constructs a simple, counterbore, or countersunk hole in a feature-based solid.
|
|
-
Protrude
-
Used to construct a
protrusion on a parametric solid using a closed profile element (shape, complex
shape, circle, or ellipse) in the design, as the protrusion profile.
|
|
-
Shell
-
(3D only) Used to create a
hollowed out solid having faces of a defined thickness.
|
|
-
Taper Face
-
Used to taper one or more faces
on a solid.
|
|
-
Spin Face
-
Used to spin, or rotate, one or more faces of a solid about an axis.
|
|
-
Sweep Edge
-
Used to place a cut or protrusion along a path defined by edges of a parametric solid using a profile.
|
|
-
Imprint
-
Used to create edge on a solid
by drawing a line, line string, block, circle, shape, imprinting a curve, or by
creating an offset copy of an existing edge.
|
|
-
Unite Solid
-
(3D only) Used to unite two or
more overlapping solids.
|
|
-
Subtract Solid
-
(3D only) Used to subtract
the volume of one or more overlapping solids from another solid.
|
|
-
Intersect Solid
-
(3D only) Used to
construct a solid that is the intersection of two or more overlapping solids.
|
|
-
Trim Multiple
-
Used to trim, extend, or trim and extend
elements to their intersection with one or more cutting elements.
|
|
-
Construct Circular Fillet
-
Used to construct a circular fillet (arc) between two elements (lines, line strings, circular arcs, circles, or shapes), two segments of a line string, or two sides of a shape.
|
|
-
Construct Chamfer
-
Used to construct a chamfer between either two lines or adjacent segments of a line string or shape.
|
|
|
|
|
|
|
|
-
Smart Match
-
Used to change all active
element attribute settings, including element templates and those attributes
specific to particular element types, so they match the attributes of an
element in the design.
|
|
-
Match Attributes
-
Used to change the active element attribute settings so they match the attributes of an element in the design.
|
|
-
Change to Active Area
-
Used to change the area attribute of a closed element(s) (shapes, ellipses, or complex shapes, or B-spline curves) to the Active Area.
|
|
-
Change Element Fill Type
-
Used to change a closed element (shape, ellipse, or complex shape, or B-spline curve) to the Active Fill Type.
|
|
-
Delete
-
Used to delete an element(s) from the design.
|